Home

We make light

Licht-Technik Vertriebs GmbH
Uwe Hagenbach & Bernhard Grill
Osterwaldstr. 9-10
D-80805 München
Tel. +49 89 360528-0
Fax +49 89 36109192
e-mail:
info

German version

last updated on: 27.7.2010

Power supply PS154 and PS254 available

SkyLight

Pictures of ski world cup Flachau (night slalom)

New Bag-o-Light TURN version available

You are here:

>Home >Products >Click and Move

Click and Move

Broschure (pdf), Eng/Ger

Technical data (pdf), Eng/Ger

The Click and Move system is the fastest and easiest way to motorize a headlight. The unmodified lamp can be remote controlled by mounting up to three motors for Pan, Tilt and Focus. This is done with standard mafer clamps, no special tools or skills are necessary. All lamps with 28mm standard spigot can be used, up to the 18kW version.

The lamp can be operated either in hanging or standing position. With the wired remote control up to 4 of the systems can be controlled. The cable connection is done with a standard 4pin XLR line. Optionally the wireless  LT-Pilot can be used.

A mechanical dimmer shutter is available for all sizes and controllable with the wired or wireless controller.

All axis have electronical torque limiters which stop the concerning motor in case of overload. In addition the pan gearbox has a mechanical friction clutch.

MaxC&M

The Click and Move system mounted on a 18kW ARRI MAX with dimmer shutter DarkVader (optionally) and wireless remote control LTPilot

Wired remote control

It is possible to control up to 4 units with the wired remote control

Bavaria

Cinec Award Winner 2006

PAN hängend Fokusantrieb
Tilt stehend

The Tilt axle works with a cable haulage. It is also mounted with mafer clamps on the standard lamp. Above the standing, on the right side the hanging version.

The pan gearbox with motor is mounted between the original yoke of the lamp and a clamp. On this axis a mechanical friction clutch is implemented.

The Focus motor is fit with a mafer clamp on the lamp. It drives the standard Focuswheel. Different adapters for the different wheels are available. These are fixed to the motor shaft with a locking pin. These enables are quick, fast and save changing.

stehend

On the left side the standing version with power supply and LT-Pilot, on the right side the hanging version.

Netzteil2

Power supply with integrated motor management

Click and Move documents:

Tilt hängend

 

Language

Size

Rev. Nr.

Date

Productinformation (pdf)

Eng/Ger

159 kB

---

21.4.2008

Manual (pdf)

Ger

743 kB

1.3

3.7.2007

Manual (pdf)

Eng

740 kB

1.3

2.7.2007

Tendering text (pdf)

Ger

 

 

 

Tendering text (pdf)

Eng

 

 

 

The tendering text is only a suggestion!

[Products] [Rental] [Service] [Contact] [News] [About LT] [Gallery] [Awards] [References] [Links] [Legal notice] [Sitemap]